Hello All

I removed an old transparent plastic Window vent/fan (not powered)
whilst refurbuing the kitchen window and have managed to break it.
Ive searched around for a new replacement but have not had much luck
tracking one down. The hole size is around 7" diameter and the vent
must be able to be opened and shut. Anyone know where I can get one
from, i've looked in B&Q, Wickes, Homebase, Focus but nothing really
matches what I need.

Any ideas?

Cheers all

TIA

Richard

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> Hello All
>
> I removed an old transparent plastic Window vent/fan (not powered)
> whilst refurbuing the kitchen window and have managed to break it.
> Ive searched around for a new replacement but have not had much luck
> tracking one down. The hole size is around 7" diameter and the vent
> must be able to be opened and shut. Anyone know where I can get one
> from, i've looked in B&Q, Wickes, Homebase, Focus but nothing really
> matches what I need.
>
> Any ideas?
>
> Cheers all
>
> TIA
>
> Richard
>

==============
Two sizes available. Despite the warning about not being suitable for double
glazing it is possible to fit one into a DG unit provided that the holes are
carefully cut and sealed around the perimeter (of the circular holes).

http://www.diy.com/diy/jsp/bq/produc...&PRODID=176902

Watch for the wrap!

Cic.

Cicero wrote:
> <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed) oups.com...
> > Hello All
> >
> > I removed an old transparent plastic Window vent/fan (not powered)
> > whilst refurbuing the kitchen window and have managed to break it.
> > Ive searched around for a new replacement but have not had much
luck
> > tracking one down. The hole size is around 7" diameter and the vent
> > must be able to be opened and shut. Anyone know where I can get one
> > from, i've looked in B&Q, Wickes, Homebase, Focus but nothing
really
> > matches what I need.
> >
> > Any ideas?
> >
> > Cheers all
> >
> > TIA
> >
> > Richard
> >
>
> ==============
> Two sizes available. Despite the warning about not being suitable for
double
> glazing it is possible to fit one into a DG unit provided that the
holes are
> carefully cut and sealed around the perimeter (of the circular
holes).
>
>
http://www.diy.com/diy/jsp/bq/produc...&PRODID=176902
>
> Watch for the wrap!
>
> Cic.

Thats the ticket, in fact its the exact one I broke, except my one
never had the cord which has been pulled off. I wondered why it was so
hard to close!

Thanks very much

Cheers

Richard